Tab Content
Tab Title
Instructions
Tab Content
  1. Insert the white wire connected to the standard Servo into pin 9 on the Arduino board.
     
  2. Insert the white wire connected to the continuous Servo into pin 10 on the Arduino board.
     
  3. Notice the standard Servo is rotating 180 degrees, pausing for 2 seconds, and rotating back.
     
  4. Notice the continuous Servo is spinning fast to the left for 2 seconds, then fast to the right for 2 seconds.

 

STEM Connections

The Servos have been programmed to move together, so when the standard Servo rotates to position 180°, the continuous Servo spins to the right, and when the standard Servo rotates to position 0°, the continuous Servo spins to the left. In other words, the Servos have been programmed to be in sync, but they could also be programmed to not be in sync.  

Tab Title
Implementation
Tab Content

Help students get both Servos working, going back to previous steps as needed.

Instruction Category
Video